Finite element modelling of the actual structure of cellular materials determined by x-ray tomography, Acta Materialia, vol.53, issue.3, pp.719-730, 2005. ,
URL : https://hal.archives-ouvertes.fr/hal-00436799
Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy, International Journal of Fatigue, vol.33, issue.12, pp.1514-1525, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-01538229
Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging, Computational Mechanics, vol.59, issue.3, pp.419-441, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01480980
On the choice of boundary conditions for micromechanical simulations based on 3D imaging, International Journal of Solids and Structures, vol.112, pp.83-96, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01471645
On the calibration of elastoplastic parameters at the microscale via x-ray microtomography and digital volume correlation for the simulation of ductile damage, European Journal of Mechanics-A/Solids, vol.72, p.287 ,
URL : https://hal.archives-ouvertes.fr/hal-01767392
Current methods in medical image segmentation, Annual review of biomedical engineering, vol.2, issue.1, pp.315-337, 2000. ,
Segmentation of x-ray computed tomography images of porous materials: A crucial step for characterization and quantitative analysis of pore structures, Water Resources Research, vol.45, issue.9, 2009. ,
Survey over image thresholding techniques and quantitative performance evaluation, Journal of Electronic imaging, vol.13, issue.1, pp.146-166, 2004. ,
Machine learning as a tool for classifying electron tomographic reconstructions, Advanced Structural and Chemical Imaging, vol.1, issue.1, p.9, 2015. ,
Deeplab: Semantic image segmentation with deep convolutional nets, atrous convolution, and fully connected crfs, 2016. ,
X-ray microtomography applications for quantitative and qualitative analysis of porosity in woven glass fiber reinforced thermoplastic, Composites Science and Technology, vol.95, pp.50-58, 2014. ,
Pattern recognition with machine learning on optical microscopy images of typical metallurgical microstructures, Scientific reports, vol.8, issue.1, p.2078, 2018. ,
High-resolution three-dimensional imaging of flat objects by synchrotron-radiation computed laminography, Applied Physics Letters, vol.86, issue.7, p.71915, 2005. ,
3d digital volume correlation of synchrotron radiation laminography images of ductile crack initiation: an initial feasibility study, Experimental Mechanics, vol.53, issue.4, pp.543-556, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00848726
An adaptive level-set method with enhanced volume conservation for simulations in multiphase domains, International Journal for Numerical Methods in Engineering, vol.109, issue.4, pp.555-576, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01504468
Evaluation of measurement uncertainties of digital volume correlation applied to laminography data, The Journal of Strain Analysis for Engineering Design, vol.53, pp.49-65, 2018. ,
URL : https://hal.archives-ouvertes.fr/hal-01674568
Ductile iron: fifty years of continuous development, Canadian Metallurgical Quarterly, vol.37, issue.5, pp.343-378, 1998. ,
Fracture mechanics based design of a railway wheel made of austempered ductile iron, Engineering Fracture Mechanics, vol.72, issue.2, pp.241-253, 2005. ,
Fatigue life distribution and size effect in ductile cast iron for wind turbine components, Engineering Failure Analysis, vol.18, issue.1, pp.12-24, 2011. ,
Micromechanisms of fracture in nodular cast iron: From experimental findings towards modeling strategies-a review, Engineering Fracture Mechanics, vol.144, pp.118-141, 2015. ,
Three dimensional microstructural effects on plane strain ductile crack growth, International journal of solids and structures, vol.43, issue.20, pp.6165-6179, 2006. ,
Micromechanical modeling of crack propagation in nodular cast iron with competing ductile and cleavage failure, Engineering Fracture Mechanics, vol.147, pp.388-397, 2015. ,
Synchrotron-radiation computed laminography for high-resolution three-dimensional imaging of flat devices, physica status solidi (a), vol.204, pp.2760-2765, 2007. ,
Digital volume correlation: Review of progress and challenges, Experimental Mechanics, vol.58, issue.5, pp.661-708, 2018. ,
URL : https://hal.archives-ouvertes.fr/hal-01980039
Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3d measurements, Engineering Fracture Mechanics, vol.192, pp.242-261, 2018. ,
URL : https://hal.archives-ouvertes.fr/hal-01710087
Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification. Analysis of uniaxial tests, Europ. J. Mech. A/Solids, vol.59, pp.140-154, 2016. ,
Fiji: an open-source platform for biological-image analysis, Nature methods, vol.9, issue.7, p.676, 2012. ,
Nih image to imagej: 25 years of image analysis, Nature methods, vol.9, issue.7, p.671, 2012. ,
Seeded region growing, IEEE Transactions, vol.16, issue.6, pp.641-647, 1994. ,
Level set methods and fast marching methods: evolving interfaces in computational geometry, fluid mechanics, computer vision, and materials science, vol.3, 1999. ,
Picture thresholding using an iterative selection method, IEEE trans syst Man Cybern, vol.8, issue.8, pp.630-632, 1978. ,
Image thresholding by minimizing the measures of fuzziness, Pattern recognition, vol.28, issue.1, pp.41-51, 1995. ,
The analysis of cell images, Annals of the New York Academy of Sciences, vol.128, issue.1, pp.1035-1053, 1966. ,
An iterative algorithm for minimum cross entropy thresholding, Pattern recognition letters, vol.19, issue.8, pp.771-776, 1998. ,
Minimum cross entropy thresholding, Pattern recognition, vol.26, issue.4, pp.617-625, 1993. ,
A new method for graylevel picture thresholding using the entropy of the histogram, Computer vision, graphics, and image processing, vol.29, pp.273-285, 1985. ,
An analysis of histogram-based thresholding algorithms, CVGIP: Graphical models and image processing, vol.55, issue.6, pp.532-537, 1993. ,
Minimum error thresholding, Pattern recognition, vol.19, issue.1, pp.41-47, 1986. ,
Moment-preserving thresholding: A new approach, Computer Vision, Graphics, and Image Processing, vol.29, pp.377-393, 1985. ,
A threshold selection method from gray-level histograms, IEEE transactions on systems, man, and cybernetics, vol.9, pp.62-66, 1979. ,
Operations useful for similarity-invariant pattern recognition, Journal of the ACM (JACM), vol.9, issue.2, pp.259-267, 1962. ,
On measures of entropy and information, tech. rep., HUNGARIAN ACADEMY OF SCIENCES, 1961. ,
Utilization of information measure as a means of image thresholding, CVGIP: Graphical Models and Image Processing, vol.56, issue.5, pp.414-419, 1994. ,
Automatic measurement of sister chromatid exchange frequency, Journal of Histochemistry & Cytochemistry, vol.25, issue.7, pp.741-753, 1977. ,
A new criterion for automatic multilevel thresholding, IEEE Transactions on Image Processing, vol.4, issue.3, pp.370-378, 1995. ,
Random forests, Machine learning, vol.45, issue.1, pp.5-32, 2001. ,
Trainable weka segmentation: a machine learning tool for microscopy pixel classification, Bioinformatics, vol.33, issue.15, pp.2424-2426, 2017. ,
Anisotropic mesh adaptation with optimal convergence for finite elements using embedded geometries, Computer Methods in Applied Mechanics and Engineering, vol.268, pp.65-81, 2014. ,
Ductile fracture of a metal matrix composite studied using 3d numerical modeling of void nucleation and coalescence, Engineering Fracture Mechanics, vol.189, pp.110-132, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01629229
Cimlib: a fully parallel application for numerical simulations based on components assembly, AIP Conference Proceedings, vol.908, pp.269-274, 2007. ,
Mixed finite elements, compatibility conditions, and applications, 2008. ,
A new body-fitted immersed volume method for the modeling of ductile fracture at the microscale: Analysis of void clusters and stress state effects on coalescence, Engineering Fracture Mechanics, vol.147, pp.398-417, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01181257
A level-set and anisotropic adaptive remeshing strategy for the modeling of void growth under large plastic strain, Computational Materials Science, vol.68, pp.32-46, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00756435